How to Apply for EIZ Membership Online: A Step-by-Step Guide for Zambian Engineers & Students
Learn how to apply for EIZ membership online in Zambia. Follow our step-by-step guide on preparing certified documents, choosing a class, and paying fees.

Trade Kings Limited
Apply before the closing date
Posted
2 November 2026

Trade Kings Limited
Visit WebsiteApplications are invited for multiple industrial, engineering, maintenance, and technical positions. Opportunities are available for qualified engineers, technicians, artisans, machinists, metallurgists, and control room operators.
Department: Plant Operations
Experience: 2–3 years
Qualifications: Diploma or Degree in Chemical Engineering or a related field
The Control Room Operator will monitor, control, and coordinate plant operations from the control room to support efficient, safe, and continuous production. The successful candidate will monitor process conditions, identify operational abnormalities, and coordinate corrective actions with field operators and technical personnel.
Monitor and control plant operations using Distributed Control Systems (DCS), PLCs, and other process control systems.
Monitor critical process parameters, including temperature, pressure, flow rates, levels, and equipment operating conditions.
Maintain plant operations within approved operating limits and production targets.
Identify, investigate, and report process deviations, equipment abnormalities, and operational failures.
Coordinate with field operators, maintenance personnel, and supervisors to resolve operational problems.
Maintain accurate operational records, shift reports, production data, and process logs.
Implement approved operating procedures, safety standards, and emergency response protocols.
Participate in plant start-up, shutdown, and process changeover activities.
Report equipment breakdowns, process interruptions, and potential safety hazards.
Ensure proper shift handover and communication of outstanding operational issues.
Diploma or Degree in Chemical Engineering or a related field.
Two to three years of relevant experience, preferably in a steel, chemical, metallurgical, or process plant environment.
Experience operating DCS or PLC systems is an added advantage.
Knowledge of industrial process plant operations and process control systems.
Understanding of chemical processes, material flow, and production operations.
Ability to interpret process diagrams, operating parameters, and technical information.
Strong analytical, monitoring, and problem-solving skills.
Good communication and teamwork abilities.
Willingness to work shifts.
Department: Engineering and Maintenance
Experience: 2–5 years
Qualifications: Diploma or Degree in Mechanical Engineering
The Mechanical Engineer will provide engineering support for the installation, maintenance, inspection, and improvement of plant machinery and equipment. The role focuses on equipment reliability, availability, safety, and production efficiency.
Plan, coordinate, and supervise preventive, predictive, and corrective mechanical maintenance.
Inspect equipment and identify mechanical defects, failures, and potential breakdowns.
Diagnose mechanical faults and recommend corrective measures.
Improve the availability and reliability of production machinery.
Prepare maintenance schedules, work plans, technical reports, and maintenance records.
Supervise mechanical maintenance personnel, contractors, and artisans.
Review engineering drawings, equipment manuals, and technical specifications.
Participate in equipment installation, commissioning, modification, and improvement projects.
Monitor maintenance costs and recommend cost-effective engineering solutions.
Conduct root-cause analysis of recurring mechanical failures and implement corrective actions.
Ensure compliance with occupational health and safety requirements and engineering standards.
Coordinate with production departments to minimise downtime and interruptions.
Diploma or Degree in Mechanical Engineering.
Two to five years of relevant experience, preferably in heavy industry, steel manufacturing, mining, or manufacturing.
Strong knowledge of mechanical engineering principles and industrial maintenance practices.
Understanding of hydraulics, pneumatics, bearings, gearboxes, pumps, motors, and transmission systems.
Knowledge of preventive and predictive maintenance systems.
Ability to interpret mechanical drawings and technical specifications.
Knowledge of equipment reliability and failure analysis.
Strong technical, analytical, supervisory, and problem-solving skills.
Knowledge of Computerised Maintenance Management Systems (CMMS) is an added advantage.
Willingness to work in an industrial environment.
Department: Engineering and Maintenance
Experience: 1–3 years
Qualifications: Craft Certificate or Diploma in Mechanical Fitting, Fitting and Machining, or a related field
The Mechanical Fitter will perform mechanical maintenance, installation, repairs, and servicing of industrial machinery and equipment to ensure safe, reliable, and efficient plant operations.
Conduct routine mechanical inspections and maintenance of industrial machinery.
Install, dismantle, repair, and maintain mechanical components and assemblies.
Perform equipment alignment, fitting, machining, and replacement of worn components.
Maintain and repair pumps, gearboxes, bearings, conveyors, rollers, valves, and other mechanical equipment.
Identify mechanical faults and perform corrective maintenance as instructed.
Assist with equipment installation, overhauls, and commissioning.
Read and interpret mechanical drawings, equipment manuals, and technical specifications.
Keep tools, equipment, and work areas in good condition.
Complete maintenance reports and record work undertaken.
Follow safety procedures, including lockout/tagout (LOTO), permit-to-work systems, and appropriate PPE requirements.
Report equipment defects, unsafe conditions, and potential operational risks.
Craft Certificate or Diploma in Mechanical Fitting, Fitting and Machining, or a related field.
One to three years of relevant industrial mechanical maintenance experience.
Experience in steel manufacturing, mining, or manufacturing is an added advantage.
Practical knowledge of mechanical fitting and maintenance techniques.
Understanding of mechanical components, equipment alignment, and installation procedures.
Ability to use fitting tools, measuring instruments, and workshop equipment.
Ability to interpret mechanical drawings.
Knowledge of industrial safety procedures.
Good troubleshooting, teamwork, and practical problem-solving skills.
Physical fitness and willingness to work shifts.
Department: Metallurgy and Quality Control
Experience: 2–4 years
Qualifications: Diploma or Degree in Metallurgy or Metallurgical Engineering
The Metallurgist will provide technical support in monitoring, evaluating, and optimising metallurgical processes to maintain product quality, improve process efficiency, and ensure compliance with production specifications.
Recent graduates with relevant qualifications are encouraged to apply.
Monitor and evaluate metallurgical processes against approved production standards.
Conduct material sampling, testing, and analysis according to established procedures.
Monitor the chemical composition and physical properties of raw materials, intermediate products, and finished steel products.
Analyse metallurgical test results and prepare technical reports.
Investigate product defects, process deviations, and quality-related problems.
Support quality control and assurance activities across production operations.
Monitor process parameters and recommend improvements to product quality and production efficiency.
Work with production and quality control teams to resolve metallurgical challenges.
Maintain accurate records of test results, material specifications, and metallurgical data.
Participate in process improvement initiatives, trials, and technical investigations.
Ensure compliance with quality management systems, safety standards, and operating procedures.
Diploma or Degree in Metallurgy or Metallurgical Engineering.
Two to four years of relevant experience.
Knowledge of metallurgical principles and steelmaking processes.
Understanding of ironmaking, steelmaking, casting, and rolling processes.
Knowledge of material testing, chemical analysis, and quality control procedures.
Ability to interpret metallurgical data and laboratory results.
Understanding of material properties, heat treatment, and metal transformation.
Strong analytical, technical, and problem-solving skills.
Good report-writing and communication skills.
Experience in steelmaking, casting, rolling, or quality control is an added advantage.
Department: Machine Shop / Engineering Maintenance
Qualifications: Craft Certificate, Diploma, or equivalent qualification in Mechanical Engineering, Machining, or a related field
Experience: Relevant practical turning and machining experience
The Turner/Machinist will repair and recondition mechanical components to specified dimensions and tolerances. The role supports the reliability and availability of rolling mill machinery, reduces equipment downtime, and contributes to efficient production.
Operate conventional lathes, milling machines, drilling machines, and other workshop equipment.
Manufacture, machine, repair, and recondition shafts, rollers, bushes, bearings, and other mechanical components.
Perform precision turning, boring, facing, threading, drilling, and related machining operations.
Read and interpret engineering drawings, sketches, and technical specifications.
Measure and inspect machined components to ensure dimensional accuracy and quality.
Carry out machining and repair work on rolling mill equipment to minimise production downtime.
Select suitable cutting tools, machine settings, and machining techniques for different materials.
Perform routine maintenance of machine tools and care for workshop equipment.
Identify machining defects, diagnose mechanical problems, and recommend corrective action.
Maintain records of machining and repair activities where required.
Maintain good housekeeping and comply with company health, safety, and environmental requirements.
Perform other relevant duties assigned by the supervisor.
Craft Certificate, Diploma, or equivalent qualification in Mechanical Engineering, Machining, or a related field.
Relevant practical experience in turning and machining.
Experience in steel manufacturing or a heavy industrial environment is an advantage.
Experience with rolling mill machinery and components is desirable.
Proficiency in operating conventional lathes, milling machines, drilling machines, and related tools.
Strong knowledge of turning, machining, fitting, and mechanical repair techniques.
Ability to interpret engineering drawings and work within specified tolerances.
Competence in using Vernier callipers, micrometres, dial gauges, and other precision measuring instruments.
Knowledge of cutting tools, machining materials, cutting speeds, feeds, and machine settings.
Strong fault-finding and problem-solving skills.
Accuracy, attention to detail, and commitment to quality workmanship.
Ability to work independently and collaboratively.
Good time management and ability to work under pressure.
Knowledge of occupational health and safety procedures.
Note: The source advert includes additional welding and fabrication requirements under this position. Applicants should confirm the precise requirements for the Turner/Machinist role with the employer.
Department: Machine Shop / Engineering Maintenance
Experience: 3–5 years
Qualifications: Diploma or Advanced Certificate in Mechanical Engineering, Machining, Toolmaking, or a related discipline
The Machine Shop Supervisor will oversee machine shop operations, ensuring that machining, component manufacture, refurbishment, and repair activities meet technical specifications, quality requirements, safety standards, and production priorities.
Supervise daily machine shop operations and allocate tasks to machinists, turners, machine operators, and other workshop personnel.
Plan, schedule, and monitor machining activities according to maintenance and production requirements.
Oversee the manufacture, refurbishment, and repair of shafts, bushes, rollers, pins, sleeves, and other engineering components.
Interpret engineering drawings, technical specifications, tolerances, and machining instructions.
Ensure the correct use of conventional and, where applicable, CNC machines.
Monitor the quality and dimensional accuracy of machined components using appropriate measuring instruments.
Ensure compliance with engineering standards, quality requirements, and workshop procedures.
Coordinate preventive maintenance, inspection, and servicing of machine shop equipment.
Monitor raw materials, cutting tools, consumables, and other resources to minimise waste and control costs.
Enforce machine safety, guarding, housekeeping, and safe working practices.
Identify training needs, coach employees, and promote skills development.
Monitor attendance, productivity, workmanship, and compliance with departmental procedures.
Prepare reports covering completed jobs, outstanding work, machine utilisation, material usage, and maintenance requirements.
Coordinate with engineering, mechanical maintenance, production, and stores teams.
Identify opportunities to improve machining processes, reduce downtime, and increase productivity.
Perform other duties assigned by management.
Grade 12 School Certificate.
Diploma or Advanced Certificate in Mechanical Engineering, Machining, Toolmaking, or a related discipline.
A recognised trade qualification in Turning and Machining is an added advantage.
Three to five years of relevant machining or machine shop experience, preferably in heavy industry or steel manufacturing.
Demonstrated experience supervising or leading a machine shop team.
Practical knowledge of turning, milling, drilling, grinding, component refurbishment, and precision machining.
Experience in engineering maintenance, quality control, and workshop planning is an advantage.
Strong technical knowledge of machining processes and machine shop operations.
Ability to interpret engineering drawings, tolerances, and technical specifications.
Proficiency with micrometres, Vernier callipers, dial indicators, and other precision instruments.
Knowledge of conventional and CNC machining, where applicable.
Strong leadership, supervision, and team coordination skills.
Excellent planning, scheduling, and organisational abilities.
Ability to troubleshoot machining problems and make sound technical decisions.
Knowledge of occupational health and safety requirements.
Understanding of quality assurance, equipment maintenance, and resource management.
Strong communication, reporting, and interpersonal skills.
Ability to work under pressure and meet operational deadlines.
High levels of accountability, integrity, discipline, and attention to detail.
Department: Engineering Maintenance / Fabrication
Experience: 2–3 years
Qualifications: Craft Certificate, Trade Certificate, or equivalent qualification in Welding and Fabrication
The Welder will perform welding, fabrication, repair, and maintenance of plant equipment, machinery, steel structures, and components to support operational efficiency and equipment reliability.
Perform welding and fabrication using appropriate techniques, including arc welding, MIG/MAG, TIG, and gas welding, as applicable.
Repair and maintain plant machinery, equipment, pipelines, steel structures, and other metal components.
Interpret engineering drawings, welding symbols, measurements, and technical specifications.
Cut, shape, join, and assemble metal components to the required specifications.
Inspect completed welds to ensure structural integrity and compliance with applicable quality standards.
Identify welding defects and carry out corrective work where necessary.
Inspect and maintain welding equipment, tools, and accessories.
Follow approved work procedures, permit-to-work requirements, and occupational health and safety standards.
Maintain proper housekeeping in the workshop and work areas.
Collaborate with mechanical fitters, engineers, and maintenance personnel to minimise equipment downtime.
Report equipment defects, material requirements, and maintenance challenges.
Perform other duties assigned by the supervisor or management.
Grade 12 School Certificate.
Craft Certificate, Trade Certificate, or equivalent qualification in Welding and Fabrication or a related field.
Two to three years of relevant industrial welding and fabrication experience, preferably in steel manufacturing, mining, or heavy industry.
Practical knowledge of industrial welding techniques, metal cutting, and fabrication.
Experience in plant maintenance and structural repairs is an added advantage.
Strong practical welding and fabrication skills.
Ability to interpret engineering drawings and technical specifications.
Knowledge of welding procedures, metal properties, and joint preparation.
Understanding of industrial safety practices and welding hazards.
Ability to identify and rectify welding defects.
Attention to detail and commitment to quality.
Good communication and teamwork skills.
Ability to work under pressure and meet maintenance deadlines.
Physical fitness and willingness to work in an industrial environment.
Discipline, reliability, and professional integrity.
Department: Electrical Engineering / Maintenance
Experience: 2–3 years
Qualifications: Bachelor's Degree in Electrical Engineering
The Electrical Engineer will plan, coordinate, implement, and supervise electrical engineering activities involving the installation, operation, maintenance, troubleshooting, and improvement of electrical systems and equipment.
The role aims to ensure reliable power supply, minimise downtime, improve plant performance, and maintain compliance with electrical engineering and safety requirements.
Plan and supervise preventive, predictive, and corrective maintenance of electrical systems and equipment.
Oversee the installation, testing, commissioning, and maintenance of industrial electrical equipment.
Diagnose complex electrical faults and implement corrective and preventive measures.
Monitor the performance and reliability of motors, transformers, switchgear, circuit breakers, protection systems, distribution panels, and other equipment.
Provide technical guidance on electrical maintenance, equipment selection, modifications, and system upgrades.
Review electrical drawings, circuit diagrams, single-line diagrams, and technical specifications.
Coordinate maintenance with production, mechanical maintenance, instrumentation, and other departments.
Analyse electrical failures, identify root causes, and prevent recurrence.
Develop maintenance plans, schedules, procedures, and equipment reliability improvement initiatives.
Monitor electrical energy consumption and recommend efficiency improvements.
Ensure compliance with electrical safety procedures, isolation and lockout/tagout requirements, and applicable statutory regulations.
Supervise electrical technicians, artisans, contractors, and other personnel.
Prepare reports on equipment performance, breakdowns, maintenance costs, and outstanding work.
Participate in maintenance budgets, spare-parts planning, and capital expenditure proposals.
Support continuous improvement initiatives to increase equipment availability and productivity.
Grade 12 School Certificate.
Bachelor's Degree in Electrical Engineering or an equivalent recognised qualification.
Two to three years of relevant industrial electrical engineering experience, preferably in steel manufacturing, mining, or heavy industry.
Practical experience in industrial power distribution, electric motors, control systems, and electrical maintenance.
Knowledge of PLCs, variable frequency drives (VFDs), motor control centres, and industrial automation is an advantage.
Registration with the Engineering Institution of Zambia (EIZ), where applicable, is desirable.
Strong knowledge of electrical engineering principles and industrial power systems.
Excellent fault diagnosis, troubleshooting, and problem-solving skills.
Ability to interpret electrical drawings, schematics, and technical documentation.
Knowledge of electrical protection systems, motor control, and industrial automation.
Strong project planning, maintenance scheduling, and technical reporting skills.
Ability to conduct root-cause analysis and implement engineering solutions.
Effective leadership, supervision, and team coordination.
Knowledge of electrical safety, statutory compliance, and risk assessment.
Good communication, analytical, and decision-making skills.
Ability to respond to critical plant breakdowns.
High standards of integrity, accountability, and professional conduct.
Department: Electrical Engineering / Maintenance
Experience: 2–3 years
Qualifications: Craft Certificate, Diploma, or equivalent qualification in Electrical Engineering or Electrical Technology
The Electrical Technician will carry out electrical installation, inspection, testing, troubleshooting, repair, and maintenance of industrial electrical equipment and systems to ensure safe and continuous plant operations.
Inspect and maintain industrial electrical equipment and installations.
Diagnose and rectify faults affecting motors, control panels, switchgear, lighting systems, transformers, and other plant equipment.
Install, terminate, test, and maintain electrical cables, wiring systems, distribution boards, and control circuits.
Inspect and maintain motors, motor starters, contactors, relays, circuit breakers, and motor control centres.
Assist with the installation, testing, and commissioning of new electrical equipment.
Conduct electrical testing using multimeters, insulation resistance testers, clamp meters, and other appropriate instruments.
Perform preventive and corrective maintenance according to approved schedules and procedures.
Troubleshoot motor control circuits, electrical interlocks, and control systems.
Assist with the maintenance of variable frequency drives, soft starters, and PLC-controlled equipment within the scope of competence.
Record maintenance activities, test results, equipment defects, and spare-parts requirements.
Follow electrical isolation, lockout/tagout, permit-to-work, and other safety procedures.
Maintain electrical tools, testing instruments, and equipment in good condition.
Identify and report electrical hazards and unsafe conditions.
Work with engineers, mechanical fitters, and maintenance personnel to minimise equipment downtime.
Maintain proper housekeeping and comply with environmental and workplace safety requirements.
Grade 12 School Certificate.
Craft Certificate, Diploma, or equivalent recognised qualification in Electrical Engineering or Electrical Technology.
Two to three years of relevant industrial electrical maintenance experience, preferably in steel manufacturing, mining, or heavy industry.
Practical experience in electrical installation, motor control, fault-finding, and equipment maintenance.
Knowledge of electrical testing instruments and safe electrical working procedures.
Experience with PLCs, VFDs, and industrial automation systems is an added advantage.
Strong practical electrical installation and maintenance skills.
Ability to read electrical drawings, wiring diagrams, and circuit schematics.
Proficiency in electrical fault-finding and troubleshooting.
Knowledge of electric motors, control panels, switchgear, and protection devices.
Ability to use electrical testing and measuring instruments correctly.
Understanding of electrical safety, isolation, and lockout/tagout procedures.
Ability to work independently and as part of a maintenance team.
Strong attention to detail and commitment to quality workmanship.
Good communication, reporting, and problem-solving skills.
Ability to work shifts and respond to breakdowns where required.
Discipline, reliability, and safety awareness.
Department: Electrical Maintenance / Motor Rewinding Workshop
Experience: 2–3 years
Qualifications: Craft Certificate, Trade Certificate, Diploma, or equivalent qualification in Electrical Engineering, Electrical Technology, or Electric Motor Rewinding
The Motor Rewinder will inspect, dismantle, rewind, reassemble, test, and repair electric motors and associated rotating electrical equipment to restore performance, improve reliability, and extend service life while minimising plant downtime.
Inspect faulty electric motors to determine the nature and extent of electrical and mechanical damage.
Dismantle and reassemble electric motors, alternators, generators, and other rotating electrical equipment.
Remove damaged windings and prepare stators and rotors for rewinding.
Perform motor winding calculations, coil preparation, winding, insulation, connection, and termination according to specifications.
Select suitable winding wire, insulation materials, varnishes, and other consumables.
Perform varnish impregnation, baking, drying, and other applicable insulation treatment processes.
Conduct electrical tests, including insulation resistance, winding resistance, continuity, and other appropriate tests.
Identify winding faults, insulation failures, short circuits, open circuits, and earth faults.
Inspect bearings, shafts, cooling fans, terminal boxes, and other motor components.
Assist with bearing replacement, rotor balancing coordination, and related repairs within the scope of competence.
Ensure rewound motors meet specified electrical, mechanical, and operational requirements before release.
Maintain accurate records of motor specifications, winding data, test results, repairs, and materials used.
Maintain winding tools, testing equipment, and workshop machinery.
Follow procedures for handling electrical equipment, insulation materials, varnishes, and workshop chemicals.
Comply with occupational health and safety requirements and maintain good housekeeping.
Coordinate with electrical technicians, engineers, and maintenance personnel to prioritise critical repairs.
Recommend measures to prevent recurring motor failures and improve reliability.
Perform other duties assigned by the supervisor or management.
Grade 12 School Certificate.
Craft Certificate, Trade Certificate, Diploma, or equivalent recognised qualification in Electrical Engineering, Electrical Technology, or Electric Motor Rewinding.
Two to three years of practical motor rewinding and repair experience, preferably in steel manufacturing, mining, or heavy industry.
Demonstrated practical experience rewinding low-voltage industrial motors.
Knowledge of winding patterns, coil design, insulation systems, motor connections, and electrical testing procedures.
Experience with three-phase induction motors is required or desirable depending on the employer's assessment.
Familiarity with medium-voltage motors, generator rewinding, and alternator repairs is an added advantage.
Practical skills in motor dismantling, rewinding, assembly, and repair.
Knowledge of winding calculations, coil pitch, winding layouts, and connection diagrams.
Ability to identify winding faults and determine suitable repair methods.
Proficiency with insulation resistance testers, multimeters, winding resistance meters, and related testing equipment.
Understanding of insulation classes, winding materials, varnishing, and motor protection.
Ability to interpret motor nameplates, winding diagrams, and technical specifications.
Knowledge of motor testing, fault diagnosis, and quality control.
Attention to detail and commitment to precision workmanship.
Strong troubleshooting and problem-solving skills.
Ability to work independently and meet urgent repair deadlines.
Knowledge of workshop safety, electrical isolation, and safe handling of materials.
Good communication, teamwork, record-keeping, and organisational skills.
According to the supplied advert, applicants must:
Be Zambian citizens and possess a valid National Registration Card (NRC).
Possess relevant academic and professional qualifications for the position applied for.
Provide verifiable evidence of relevant work experience where applicable.
Demonstrate integrity, professionalism, discipline, and a strong work ethic.
Possess good communication, interpersonal, and problem-solving skills.
Be medically fit to work in a demanding industrial environment.
Be able to work independently and as part of a team.
Be willing to work shifts, weekends, and public holidays where operational requirements demand.
Observe company policies, procedures, and occupational health and safety standards.
The supplied application instructions state that applications should be addressed to:
The Head – Human Resources
Universal Mining and Chemical Industries Limited (UMCIL)
Applicants are instructed to submit the following documents:
Cover letter clearly indicating the position applied for.
Updated Curriculum Vitae (CV).
Copies of relevant academic, technical, and professional qualifications.
ERB/EIZ documentation, where applicable.
Contact details of three professional referees.
Email: hr@umcil.co.zm
CC: vacancies@tradekings.co.zm
Closing date: 20 November 2026.
Only shortlisted candidates will be contacted.
Advertised Employer: Trade Kings Limited and Universal Mining and Chemical Industries Limited (UMCIL)
Employer Named in Application
Location: Lusaka, Zambia, according to the listing
Employment Type: Full-time
Number of Roles Listed: 10
Positions: Control Room Operator, Mechanical Engineer, Mechanical Fitter, Metallurgist, Turner/Machinist (Rolling Mill), Machine Shop Supervisor, Welder, Electrical Engineer, Electrical Technician, and Motor Rewinder
Application Email: hr@umcil.co.zm
Zambia Career shares job opportunities but is not the employer and does not process applications or guarantee employment. Never pay money to secure a job, attend an interview, or receive an employment offer. Always verify vacancies through official employer channels before sharing personal information or submitting documents. If you encounter a suspicious job advert or recruitment request on Zambia Career, please report it to us.
Know someone who may be interested? Share this opportunity.
Other opportunities you may be interested in.
Surya Biofuels Limited
Deadline: 30 Nov 2026
Botha Resources Limited
Deadline: 23 Nov 2026
Yalelo Limited
Deadline: 20 Nov 2026
All Saints School of Lusaka
Deadline: 27 Nov 2026
Helpful career tips and guides for job seekers in Zambia.
Learn how to apply for EIZ membership online in Zambia. Follow our step-by-step guide on preparing certified documents, choosing a class, and paying fees.
Learn how to succeed in your first job in Zambia with 10 practical tips on professionalism, communication, teamwork, workplace skills, and career growth.
Find graduate programmes and internships in Zambia, meet application requirements, prepare a competitive CV, and improve your chances of securing an opportunity
Getting a job is important but a healthy workplace matters too. Learn to recognise workplace culture, avoid burnout and choose an environment where you can grow